The Fusion utilizes powerful UV Persulfate oxidation allowing superior Carbon liberation from even the most challenging matrixes. By implementing The patent-pending Static Pressure Concentration (SPC) technology, the Fusion is able to achieve unprecedented low-end sensitivity from a Non-Dispersive Infrared (NDIR) detector. The Fusion is built on the latest Technology and is designed to offer productivity for a wide variety of Applications
The Fusion is fully capable of providing effective solutions for laboratories working in the following industries :
- Nutraceuticals and Cosmetics
- Drinking Water Qulity
- Waste Water Monitoring
1.The analyzer must comply with Standard Method 5310C, USEPA 415.1-3, USP 643, and EP 126.96.36.199.Total run times for TOC samples in duplicate will be 12 minutes or less and triplicates will be 18 minutes or less.3.The analyzer will use a combination of sodium persulfate in and aqueous solution and UV irradiation to oxidize organic compounds. Other reagent mixtures can be used to easily treat high chloride samples.4.Detection of the carbon dioxide resulting from oxidation of inorganic carbon (IC) and organic carbon (OC) will be accomplished by a Non-dispersive infrared (NDIR) detector. 5.The analyzer must use a Mass Flow Controller for instant control of carrier gas. The analyzer must be able to change the flow rate (0-500 ml/min) during different modes of a user-defined method. A pressure measurement must accompany the flow rate.6.Non-Dispersive Infrared (NDIR) detector will be housed in a thermally protective closedsystem, No additional purge gas is necessary to eliminate environmental CO27.Range of analysis with and without using an autosampler will be 0 to 4,000 ppm. The cross contamination of the analyzer shall be less than 1%8.Autosampler must have the ability to hold (120) 20 mL, (90) 50 mL, or (75) 40 mL samplecontainers and (4) dedicated standard 125 mL bottles for calibration, check and systemsuitability standards.9.Software will operate in either Windows 200/ XP and be a 21 CFR 11 compliance tools(electronic signatures & audit trials). Built-in PC Standalone Feature with Touchscreenattached to instrument.10.Analyzer and autosampler will be supplied with a one year parts and labor warranty.11.Instaalation and on-site start-up assistance available by factory trained personnel.